The new type of commercial broiler cage equipment is 1600mm long, 1050mm wide and 550mm high, and can raise 130 adult chickens on four floors. Broiler breeding equipment
Features: Feeding at the front and chickens coming out at the back. The cage door is 200mm wide. The cage door size is a large cage door with a length of 1600mm and a height of 550mm. The wire diameter of the front and rear cage doors is 3mm. Each group of cages (four layers) is equipped with a top net. Solved the phenomenon of broken legs and wings when the chickens came out from the small cage door of the cage. In addition, the number of chickens raised with this equipment for the same chicken house area is 30% more chickens than other small cage equipment. The cage frame adopts galvanized sheet bending and punching size standard, and the cage mesh is hot-dip galvanized, without burrs, and the zinc amount is not less than 10%. The service life of the whole equipment is more than 10 years.
The head and tail plates are made of 3mm thick 275g hot-dip galvanized sheet, which is corrosion-resistant.
It is equipped with a national standard 1.5KW speed ratio 71 motor and a cycloidal pinwheel reducer. The diameter of the driving drum is 140mm, and the rubber is hanging. The diameter of the tail drum is 70mm, and the traction length is less than or equal to 120 meters.
The designed conveyor belt collects the feces under the chicken coop, and the feces fall from each layer of the conveyor belt to the horizontal conveyor belt, and then directly transported to the truck through another conveyor belt. 8mm thick on both sides can effectively prevent chicken manure and sewage from flowing into the trough. And it is equipped with a plastic splint (plastic hook) to ensure that the conveyor belt will not deviate and wear and tear will be reduced to a low point.
The transmission bandwidth is 970mm, and the weight per square meter is 550g. It is made of polymer environmentally friendly materials. It has good wear resistance, strong tensile force, anti-aging, no thermal expansion and contraction, and the conveyor belt travels 8.6 meters per minute.
Equipped with cone-valve nipple, adopts double-layer sealing design, and the sealing is reliable. The outer shell is made of anti-corrosion synthetic material, anti-corrosion, anti-wear, and can rotate 360° vertically and horizontally to discharge water, with a water output of 80-120ml per minute. The height of the waterline can be adjusted. The front-end water supply pressure regulator has large flow, high sensitivity, clean water line recoil, saving time and effort.
Feeding capacity: each nipple can provide drinking water for 10-20 broilers. The square pipe waterline is always kept horizontal in the cage without deformation or rotation.
Cage size | Storey height | Total length/group (mm) | Total width/group (mm) | Total height (mm) | Feeding amount per group (only) |
1600*1050 | 3 | 1600 | 1050 | 1850 | 100 |
1600*1050 | 4 | 1600 | 1050 | 2465 | 130 |
Mobile phone: +86-136-0417-2833 +86-159-4172-6116
Website: www.hnydx.com
Address: Qikou Town, Dashiqiao, Yingkou City, Liaoning Province
Mobile site